WD Pickup Rings, Humbucker, Flat Base

Flat Bottom Set of Humbucker Rings:

This is a typical set of plastic mounting rings found on most 2 humbucker guitars. It is comprised of 1 high and 1 low ring.  These are perfect for Gibson and Epiphone flat-top electrics, and other humbucker guitars with flat tops (not curved or arched). 

Part number HMRB Set.

Flat Set:

• Low = 9/64 inches – 13/64 inches
• High = 19/64 inches – 3/8 inches

Interior Dimensions:

• Pickup cutout width = 1.5 inches (38.2mm)
• Pickup cutout length = 2.76 inches (70.2mm)

Exterior Dimensions:

• Exterior width = 1.76 inches (44.7mm)
• Exterior length = 3.50 inches (89.1mm)
• Exterior height tall side = .375 inches (9.5mm)
• Exterior height short side = .295 inches (7.5mm)
• Height holes center to center = 3.07 inches (78mm)
• Mounting holes center to center length = 3.185 inches (8.09mm)
• Mounting holes center to center width = 1.43 inches (36.3mm)